The Epro™ 1000 is NiteRider's first headlight designed specifically for electric bikes. It has a pre - wired power line to easily connect to your eBike's battery. Just turn on the ignition switch, and the headlamp lights up. It offers two handy modes: Steady ON and Pulse Flash, and it has a built - in mode memory that remembers your last setting. NiteRider® suggests getting this headlight installed by an authorized e - bike service and repair shop. Check your bike manufacturer's manual for compatibility, as it's not for 6 - Volt systems. Key features include 1000 lumen output, two modes, hardwiring with a voltage range of 12 to 40 Volts (1.2 amps at 12v, 300mA at 40 volts), water and dust resistance (IP64 rated), a light weight of 166 grams, and it fits 22mm - 31.8mm seat posts. It comes with a pre - wired Epro™ 1000 Head Light, a handlebar clamp mount, and rubber mounting shims.
Using the NiteRider Epro 1000 headlight is easy. First, make sure it's installed by an authorized e - bike service and repair shop. Connect the pre - wired power line to your eBike's battery. When you turn on the ignition switch, the headlight will power on. You can choose between the Steady ON and Pulse Flash modes. The headlight will remember the last mode you used. Check your bike's manual to ensure compatibility, especially as it's not suitable for 6 - Volt systems. For maintenance, keep it clean and dry. Since it's water and dust resistant (IP64 rated), it can handle normal riding conditions, but avoid submerging it in water. If you notice any issues, take it to a professional for inspection.
